Layer Settings

Contents

  • Predefined Layer Styles

When styling your layer, choose from one of the 100+ styles that’s closest to your desired styling. Then this will act as a “preset” of styles that can be further adjusted with the WYSIWYG editor.

layer-classes

When editing your layers, you’ll start of with a predefined layer style. And additional settings adjustments you make will only be applied to the current layer.

However, once you’ve made adjustments for a specific layer, you can save your adjustments as a new “predefined” layer style to use for additional layers.

save-layer-styles

1. Save: Override the current preset style with your layer’s current settings (original predefined style will be permanently modified).

2. Save As: Create a new preset style based on the current layer settings (original predefined style will not be overridden).

3. Rename: Change the title of the currently selected preset style for your own convenience.

4. Reset: Revert currently adjusted settings to the predefined layer styles original settings.

5. Delete: Permanently delete the current predefined layer style (can not be undone!).

layer-save-options

After adding your layer to the slide, use the “Style” section to format text, adjust layer positioning, and also apply additional CSS styles to your layer content.

2.1 Basic Styling
layer-styles
Legend:
  • 1. Selected Preset
  • 2. Font Family
  • 3. Font Size
  • 4. Line Height
  • 5. Bold Text
  • 6. Text Color
  • 7. Horizontal Align
  • 8. Vertical Align
  • 9. Horizontal Offset
  • 10. Vertical Offset
  • 11. Layer Width
  • 12. Layer Height
  • 13. Text Wrapping

2. Font Family

Setup your Google Fonts from the slider’s settings section.

7-8. Horizontal / Vertical Aign

Alignment can be based on Layers Grid Size or the entire size of the slider, which is set in the layer’s Behavior section.

* Layer content should always be positioned within the “Layers Grid”.  Otherwise the content may bleed off the screen when the slider is resized.  Click here for a visual example.

9-10. Horizontal / Vertical Offsets

Offset positions from initial alignments (#7-8). For example, a “Horizontal Alignment” of “center” with a “Horizontal Offset” of 50px would equal 50px to the left of center.

9-10. Layer Width / Height

Entering pixel values will give the layer a predefined size. Or for text layers, enter “auto” for automatic sizing.

13. Text Wrapping

Used in combination with a defined pixel width.. For example, if your layer’s width (#11) is 200px, use the Text-Wrapping option to automatically wrap long lines of text.

2.2 Advanced Styling

Click the “+” button to activate the advanced styling section.

advanced-styles
advanced-style-font
  • 1. Font Opacity
  • 2. Italics
  • 3. Underline
  • 4. Text Align

1. Font Opacity

Enter a number between 0-1, such as “0.75”.

4. Text Align

Text align for the layer itself (unrelated to actual layer positioning).

Useful for layer text with multiple lines (i.e. a paragraph of text).

advanced-style-background
  • 1. Background Color
  • 2. Background Opacity
  • 3. Padding Top
  • 4. Padding Right
  • 5. Padding Bottom
  • 6. Padding Left

2. Background Opacity

Enter a number between 0-1, such as “0.75”. Or for no background color (i.e. “transparent”), enter the number “0”.

3-6. Padding

When a background color is used, add some “padding” to give your layer text a nice, spaced out background.

Otherwise, for layers with no background color (i.e. “Background Opacity” equals “0”), use the number “0” for the padding values.

advanced-style-border
  • 1. Border Color
  • 2. Border Opacity
  • 3. Border Style
  • 4. Border Size
  • 5. Top Border Radius
  • 6. Right Border Radius
  • 7. Bottom Border Radius
  • 8. Left Border Radius

2. Border Opacity

Enter a number between 0-1, such as “0.75”. Or for no background color (i.e. “transparent”), enter the number “0”.

3. Border Style

Choose “solid” for a regular border, and “none” for no border.

5-8. Border Radius

Use to achieve rounded corners for your layers. Applicable for when the layer also has a background color applied (see “Background” tab above).

advanced-style-transform
  • 1. Opacity
  • 2. scaleX
  • 3. scaleY
  • 4. skewX
  • 5. skewY

1. Opacity

Apply a transparency level to the entire layer. Enter a number between 0-1, such as “0.75”.

1-3. scaleX, scaleY *

Zoom the layer’s width. Click here for an example of “scaleX”, and here for an example of “scaleY”.

* These transforms work best when both have the same values applied (i.e. scaleX = 1.5, scaleY = 1.5).

4-5. skewX, skewY

Applies a 2D angle to the layer. Click here for an example of “skewX”, and here for an example of “skewY”.

advanced-style-rotation
  • 1. rotationX
  • 2. rotationY
  • 3. rotationZ
  • 4. Horizontal Origin
  • 5. Vertical Origin

1-2. rotationX, rotationY

Rotate the layer in 3D space:

rotation-example

3. rotationZ

Can be used in combination with #1 and #2 above, but can also be used by itself for a traditional rotation (i.e. non-3D).

4-5. Horizontal/ Vertical Origin

Usually “50%” is best. Click here for more information.

advanced-style-perspective
  • 1. 3D Perspective
  • 2. translateZ

1. 3D Perspective

Adds depth to an object in 3D space. Click here for additional information.

1. translateZ

The layer’s z-axis position in 3D space. Click here to see an example.

advanced-style-parallax

Apply a “Parallax Level” (1-10) to the layer if you’re using the parallax option for the slider.

Click here to learn about the slider’s parallax option works and how it can be used.

advanced-style-corners

Apply sharp corners to the sides of your layers. The screenshot to the right is a useful example of this, where the layer is positioned at the bottom of the slider.

corners-example

Advanced CSS is in relation to the selected layer style (circled in the screenshot below).

advanced-style-css

Choose “Template” to modify the CSS for the currently selected predefined layer style.

CSS entered here will be attached to the predefined layer style (i.e. will carry over when used for additional layer content).

Style from Options:

CSS styles automatically applied from the layer’s chosen settings.

Additional Custom Styling:

Add additional CSS that can’t normally be applied through the layer’s WYSIWYG editor.

edit-style-css
edit-inline-css

Choose “Layer” to add CSS to this specific layer only.

CSS entered here will not be attached to the predefined style, and therefore will not carry over when the predefined layer style is used for other layers.

layer-inline-css

The advanced styling section has two possible “states” where styles can be applied.

The first is “idle”, which will be the default styles for the layer, and the second is “hover”, where you can change the layer’s styles for its mouseover state.

To setup some special styles for the layer’s “hover” state, set “Layer Hover” to “ON”, as shown in the following screenshot:

layer-hover

Then once “Layer Hover” is set to “ON”, you’ll see settings for the two states that can be toggled.

Then you’ll have the ability to set specific styles for both the layer’s “Idle” state (default appearance), and its “Hover” state (mouseover appearance).

advanced-styling-states

For convenience, click the “copy” button to copy over styles from one state to the other.

For example, if you’ve applied multiple styles to the “idle” state, but only want to adjust the border-color for the “hover” state, click the “hover” state button, then click the “copy” button, and then choose “copy from “idle”.

copy-from-idle
copy-from-idle-2
Special Hover Settings
hover-settings
  • 1. Animation Speed
  • 2. Animation Easing
  • 3. Hover Mouse Cursor

1-2. Animation Speed / Easing

Idle styles will automatically animate when converted to their hover styles.

“Animation Speed” is in milliseconds, and a number between 200-500 is usually best.

“Easing” is what gives a web animation that “real life” type of movement.  Choose between over 35 options to see which one you like best.  The most commonly used options are “Power2.easeOut”, and “Power3.easeOut”.

3. Mouse Cursor

The most common choice for a hover mouse cursor is “pointer”, which will be a hand symbol.  Other common choices are “auto” and “default”.

  • Predefined Animation Templates

When setting your layer animations, choose from one of the 30+ animation templates that’s closest to your desired look.  Then this will act as a “preset” of settings that can adjusted further.

animation-template

When editing your animations, you’ll start of with a predefined animation template, and additional settings adjustments you make will only be applied to the current layer.

However, once you’ve made adjustments for a specific animation, you can save your adjustments as a new “Animation Template” to use for additional layers.

save-animation-template

1. Save: Override the current preset animation with your adjusted current settings (original animation template will be permanently modified).

2. Save As: Create a new Animation Template based on the current settings (original predefined Animation Template will not be overridden).

3. Rename: Change the title of the currently selected Animation Template for your own convenience.

4. Reset: Revert currently adjusted settings to the predefined Animation Template’s original settings.

5. Delete: Permanently delete the current predefined Animation Template (can not be undone!).

save-animation-options

After adding a layer to the slide, and selecting it in the preview canvas, when you click the “Animation” tab, you’ll see a live preview of the layer’s animation.

Click the “Pause” button to stop the admin preview.  And then click the same button to preview your animation once again.

layer-settings-animation

Every content layer has a “Start” animation that will happen when the layer first appears, and an “End” animation for when the layer disappears.

The actual time when these animations take place will depend on the layer’s “Visible Timeline”, which is set in the Layers Timing and Sorting part of the slide’s admin.

layer-animation-start-end
Basic Settings
layer-animation-basic-settings
  • Special Note:
    Select "No Animation" from #1 above if you do not want your layer to animate.
Legend:
  • 1. Animation Template
  • 2. Animation Easing
  • 3. Animation Speed
  • 4. Split Animation Text
  • 5. Split Animation Delay

1. Animation Template

Choose from over 30+ prebuilt animations.  And preview each option by clicking the “Play” button next to the “Animation” tab.

2. Animation Easing

“Easing” is what gives a web animation that “real life” type of movement.  Choose between over 35 options to see which one you like best.  The most commonly used options are “Power2.easeOut”, and “Power3.easeOut”.

3. Animation Speed

How long the animation will last from start to finish in milliseconds (1000 = 1 second).

An optimal number will depend on your chosen animation.  For example, when using a simple “Fade”, a number between 300-500 is usually best, but for more complex animations (especially when using an “easeInOut” easing), a higher number such as 500-1000 will work well.

4. Animate by Words, Letters or Lines

For text-based layers, you can animate words, letters or lines one by one with this option.

Choose “No Split” to just animate the entire layer at once.

5. Split Animation Delay

When animating by words, letters or lines, the essence of the effect is that each will animate one after the other.  The delay value here is the amount of time that will be used for this sequenced animation.

The delay value is in milliseconds.  A number between 5-30 usually works best.

Advanced Settings

Click the “+” button as shown in the following screenshot to edit the “Start” or “End” animation’s advanced settings.

START Animation Settings = Animate FROM these settings

END Animation Settings = Animate TO these settings

layer-animation-advanced-settings

X = Horizontal Axis

Y = Vertical Axis

Z = 3D Axis

Choose “Inherit” to honor the animation’s original settings, “Custom” to enter a specific pixel value, or try out one of the other options to see which one you like best.

animation-offset

Adjust the animation’s Opacity (i.e. “transparency”) level.

Choose “Inherit” to honor the animation’s default setting, “Random” to always randomize the value each time the slide is shown, or “Custom” to enter a special value (a number between 0-1).

animation-opacity

1. Animate 3D rotationX (rotate around x-axis)

2. Animate 3D rotationY (rotate around y-axis)

3. Animate 2D Rotation (circular, non-3D rotation)

Choose “Inherit” to honor the animation’s default setting, “Random” to always randomize the value each time the slide is shown, or “Custom” to enter a special value (a positive or negative number usually between 0-360).

animation-rotation

1. Animate scaleX (layer’s width)

2. Animate scaleY (layer’s height)

Choose “Inherit” to honor the animation’s default setting, “Random” to always randomize the value each time the slide is shown, or “Custom” to enter a special value (a number between 0-1).

For a traditional “Zoom” type animation, set the “scaleX” and “scaleY” parameters to the same values.

animation-scale

1. Animate skewX (horizontal angle)

2. Animate skewY (vertical angle)

Choose “Inherit” to honor the animation’s default setting, “Random” to always randomize the value each time the slide is shown, or “Custom” to enter a specific amount of pixels to skew the layer by.

animation-skew

X = Apply a horizontal mask for the animation

Y = Apply a vertical mask for the animation

Apply a mask to the layer, which will result in the animation only becoming visible once the layer is positioned inside the masked area.

For a good understanding of how masking works when applied to animations, click here to see how a generic animation looks with masking applied, and here to see a generic example of the same animation, but without any masking.

animation-masking
3.2 Loop Animations
back to menu

Apply continuous, animated movement to the layer even after it’s initially animated into view.

loop-animation

1. Loop Animation

Visual Examples: Pendulum | Slide Loop | Pulse | Wave

2. Loop Speed

The amount of time the animation should last before it loops again in seconds.  A number between 2-5 usually works best.

3. Loop Easing *

“Easing” is what gives a web animation that “real life” type of movement.  For Loop animations, try one of the “easeInOut” options such as “Power1.easeInOut” for a smooth, continuous motion.

* not available for “Wave”, as this animation only works best with a predefined easing.

Loop Parameters
loop-pendulum
  • 1. Starting Rotation
  • 2. Ending Rotation
  • 3. Rotation X point
  • 4. Rotation Y point

1-2. Starting/Ending Rotation

Choose the rotation degrees for the start and end of the looped animation.  Use a negative number for the “start” value” and a positive number for the “end” value.

3-4. Rotation X/Y point (transform-origin)

Percentage based values that will act as the axis point for where the layer rotates from.

Loop the layer from one point to another.  “X” values are the horizontal plane (left to right), and “Y” values are the vertical plane (top to bottom).

loop-sides

Adjust the Zoom Start (#1) and Zoom End (#2) parameters to continuously zoom the layer in and out.  A value of “1” equals 100%, so “1.5” would be 150%, etc.

loop-pulse
loop-wave
  • 1. Rotation X point
  • 2. Rotation Y point
  • 3. Start Angle
  • 4. Radius of Rotation

1-2. Rotation X/Y point (transform-origin)

Percentage based values that will act as the axis point for where the layer rotates from.

3. Start Angle

Wave animations rotate on a 360 degree circular loop.  The “angle” value here would be the starting position for the animation when this loop begins.

4. Radius of Rotation

Defines a pixel-based orbital area that the layer will animate around.

Choose when the layer should be visible such as per device, above a certain screen width, or on mouse hover.

4.1 Visibility on Devices
layer-visibility
Desktop:

Show/hide layer on screens higher than 1024px width (regular desktop view).

Notebook:

Show/hide layer on screens 1024px wide or higher (tablet landscape).

Tablet:

Show/hide layer on screens 768px wide or higher (tablet portrait / smartphone landscape).

Smartphone:

Show/hide layer on screens 360px wide or higher (smartphone portrait).

4.2 Hide Under Width / Only on Slide Hover
hide-under-width-show-on-mouse-hover
1. Hide "Under" Width

Layer will be hidden according to slider’s Hide Element Under Width -> Predefined Layers value in the slider’s main settings.

2. Only on Slide Hover

Layer will only be shown when the user hovers their mouse over the screen (for mobile devices, the hover equivalent would be a finger “tap”).

layer-behavior
1. Auto Responsive

Choose to make the layer responsive by default (layer will resize when slider resizes).

2. Child Elements Responsive

If the layer contains additional content (raw HTML, shortcode from other plugin, etc.), the slider will attempt to resize all nested elements.

3. Align

Layer Alignment is particularly useful for when using Full Width slider, as sometimes you want your content to align to the sides of the screen as opposed to your slider’s “Layers Grid” size.

In the following example, the layer has a “top left” alignment, with an “Offset X” of 115px and an “Offset Y” of 65px.

layer-behavior-alignment

The example slider below has a “Full Width” Slider Layout and a “Layers Grid” of 600×400.  When the screenshots were taken, the screen size was 900px wide, so the slider had also “responded” to this width.

Layer Align Behavior: Grid Based
Layer will always be aligned and positioned based on the slider's grid size (i.e. 115px from the left of the Layer's Grid boundaries).
align-to-grid
Layer Align Behavior: Slide Based
Alignment and positioning of Layers will always be based on the slider's actual size (i.e. 115px to the left of the screen).
align-to-slider
4. Responsive Offset

In the following example, the layer has a “top left” alignment, with a 50px offset from the top and left.

responsive-alignment

Responsive Offset: ON

When the slider is resized down by 50%, the Layer’s original “Offset” values are also reduced by 50%.

responsive-alignment-resized

Responsive Offset: OFF

When the slider is resized down by 50%, the Layer’s original “Offset” values are NOT reduced or changed.

responsive-alignment-non-responsive

Slider Revolution 5.4.2 introduced a new way of hyperlinking Layers, called “Actions”.

An “Action” is essentially something that happens when the user interacts with the Layer’s content (clicking the layer, or mouse hovers).

To add a Layer Action, select the Layer on the preview stage canvas, and then from the "Actions" tab, click the "+" button.
add-layer-action
Next, choose what type of mouse interaction should be applied to the Layer (click, "Mouse Enter" (mouse-over/hover), or "Mouse Leave" (i.e. mouse-out)
action-type
  • Quick Tip:
    To show a "hand cursor" when hovering your mouse over the Layer, apply the settings shown in this screenshot.
Next, click one of the links from the submenu below to learn about the many different Layer Action possibilities.
6.1 Link Layer to another web page
back to menu
simple-link

1. Actions Menu

Choose “Simple Link”

3. Link Target

Choose “Same Window” to open the link in the same window/tab.

Choose “New Window” to open the link in a new window/tab.

2. Link Url

Enter the full url (including the “http://” part) of the web page you wish to hyperlink to.

4. Link Type

Choose “A Tag Link” for best SEO practices.  Or choose “jQuery link” if you’d rather the link be opened with JavaScript instead.

6.2 Navigate to a different slide
back to menu

Useful for building custom navigation, such as a special slider menu, etc.

Navigate to a specific Slide
jump-to-slide
Navigate to Previous Slide
previous-slide
Navigate to Next Slide
next-slide
6.3 Play/Pause Slider
back to menu

Useful for building a special “play/pause” button to control the slider’s autoplay.

Play Slider
play-slider
Pause Slider
pause-slider
Toggle Play/Pause
toggle-slider
6.4 Scroll below slider
back to menu

Useful for applying to a “Read More” button, which would then scroll to additional content below the slider.

Use the “Scroll Offset” option to scroll additional pixels below the slider.

scroll-below-slider
6.5 Show/Hide Additional Layers
back to menu

Add interactivity to your slides by controlling Layer visibility with these options (i.e. clicking one Layer shows another Layer).

To get started, choose a "Target" Layer that you'd like to control (#2 below).
combo-layer-actions
Next, choose one of the following options from the Layer Actions menu (#1 above).
1. Start Layer "in" Animation"
back to menu

“Target” Layer will be initially hidden, and then animated into view when current Layer’s Action is triggered (on-click or hover).

combo-actions-settings

1. Target Layer

Other Layer that will be animated into view.

3. Animation Timing

Choose “Wait for Trigger” to honor the Layer Action’s default behaviour.

Or use one of the additional options to “replay” animations upon user-interaction.

2. Delay

Add a small delay (in milliseconds) before the Target Layer is animated into view.

4. Trigger Memory

Choose “Keep Last Selected State” to remember the user’s previous interaction.

Choose “Reset Animation and Trigger States every Loop” to not remember the user’s previous interaction.

2. Start Layer "out" Animation
back to menu

“Target” Layer will animate out of view when current Layer’s Action is triggered (on-click or hover).

combo-actions-settings

1. Target Layer

Other Layer that will be animated out of view.

3. Animation Timing

Choose “Wait for Trigger” to honor the Layer Action’s default behaviour.

Or use one of the additional options to “replay” animations upon user-interaction.

2. Delay

Add a small delay (in milliseconds) before the Target Layer is animated out of view.

4. Trigger Memory

Choose “Keep Last Selected State” to remember the user’s previous interaction.

Choose “Reset Animation and Trigger States every Loop” to not remember the user’s previous interaction.

3. Toggle Layer Animation
back to menu

“Target” Layer will alternately animate into and out of view as current Layer’s Action is triggered (on-click or hover).

combo-actions-toggle-layer-settings

1. Target Layer

Other Layer that will be animated out of view.

3. At Start

The Target Layer’s initial visibility, where “Play in Animation” equals “initially visible” and “Keep Hidden” equals “initially hidden”.

5. Trigger Memory

Choose “Keep Last Selected State” to remember the user’s previous interaction.

Choose “Reset Animation and Trigger States every Loop” to not remember the user’s previous interaction.

2. Delay

Add a small delay (in milliseconds) before the Target Layer is animated out of view.

4. Animation Timing

Choose “Wait for Trigger” to honor the Layer Action’s default behaviour.

Or use one of the additional options to “replay” animations upon user-interaction.

6.6 Play/Pause Video
back to menu

Useful for building a special “play/pause” button for a Video.

layer-actions-video

1. Video Action

Choose to Start, Stop, or Toggle the play/pause state of the Target Layer’s Video.

2. Target Layer

Layer that contains the Video (can be current Layer or a different Layer).

3. Delay

Add a small delay (in milliseconds) before the Action takes place.

6.7 Advanced Actions: Simulate Click / Toggle Layer Class
back to menu
Simulate Click:
Useful if other Layer has jQuery event attached that needs to be triggered.
simulate-click

1. Target Layer

Other Layer to simulate the click action.

2. Delay

Add a small delay (in milliseconds) before the Target Layer is animated out of view.

Toggle Layer Class:
Add/Remove CSS Class for a Layer.

For example, you could add a special Class to the Layer for your custom CSS, and then toggle this class on and off with this Layer Action.

toggle-layer-class

1. Target Layer

Layer where Class will be added/removed (can be current Layer or a different Layer).

2. Delay

Add a small delay (in milliseconds) before the Target Layer is animated out of view.

3. Class

Name of the CSS Class to toggle on and off.

Layer attributes can help with adding advanced Custom CSS for a specific Layer.  Example usage:

layer-attributes

1-4. ID, Class, Title, Rel: Add a custom attribute to the Layer for advanced usage.

5: Image Alt Text: Add “Alt” text for Layer Images for maximum SEO.

From Media Library: Alt text will be taken from “WP Main Menu -> Media -> Library -> Select Image -> Alt Text”.

From Filename: Image’s filename will be used for the Alt text.

Custom: Enter a custom value (field #6 above) for the Alt text.

Choose which version of the image should be loaded and also if the image should be Lazy-Loaded.

layer-performance

1. Lazy Loading: 

Default Settings – Image will be loaded according to the slider’s global Lazy Load setting.

Force Lazy Loading – Lazy Load the image regardless of global Lazy Load setting.

Ignore Lazy LoadingDo not Lazy Load the image regardless of global Lazy Load setting.

2. Source Type:

Choose which version of the image should be loaded.  Often “Original” can equal a very large file size, so usually “Large” or “Medium” is a good choice for optimal loading performance.

Choose “Default Setting” to use the slider’s global Image Source Size setting.  Or override the default setting with one of the other choices.

The Layers Timing & Sorting section is a visual representation of the slide’s animation sequence.  It’s also where you can adjust the z-index depth for each Layer (i.e. Text Layer should appear on top of Image Layer, etc.).

layers-timing-sorting

1. Play/preview the current slide’s animation sequence (slider’s main background and layers).

2. Reset the timeline so it can be previewed from the start.

3. Drag with your mouse for a slow motion / manual preview experience.

4. Increase/decrease the slide’s main delay.

layers-timing-sorting-3

Drag the Layer’s timeline left and right to position the layer’s “visibility” within the lifetime of the current slide.

In the above example, the “Image Layer” is set to animate in at the “1.5 second” mark, and then will animate out at the “5.5” second mark.

layers-timing-sorting-4

1. Represents the Layer’s “Start” animation.

2. The Layer will be in a “Static” state during this time (has already animated into view, and has not animated out of view yet).

3. Represents the Layer’s “End” animation.

In the above screenshot, the “Start” animation is set to last for 1 second, and the “End animation will last for 0.5 seconds.   Drag the mini-circles left and right to increase or reduce these times.

layers-timing-sorting-5

Represents a custom "End" time for the layer (layer will disappear before the slide's official end has been reached).

Click to set the Layer's "End" animation time to equal the very end of the slide's timeline.

layers-timing-sorting-6

Drag the listed Layers with your mouse on top of one another to sort the Layers, setting their z-index/stacking order.  Layers that are hyperlinked should always have a higher z-index than other layers (i.e. positioned below other Layers in the list).

And lastly, drag the horizontal scrollbar at the bottom in case your Layer has a large “delay” value (i.e. a longer timeline).